Reform, and the death of the Tory Party

Page may contain affiliate links. Please see terms for details.

Pinno718

Slight downhill specialist
Ah good, I've often thought that the answer to the UK industry's challenges is to replace a simple system with something more complicated.

Aren't you more worried about if the immigrants eat you once they've consumed all the Swans?
 
Last edited:
OP
OP
briantrumpet

briantrumpet

Timewaster
Apparently Reform is pushing the Imperial measurements to 'make trade with the US easier' without realising that a lot of the US Imperial measurements are different.

It's worth remembering, as an aside, that Concorde managed to get designed and built, and flew, with the British using Imperial and the French using metric through the process. That amuses me.
 

Psamathe

Squire
Apparently Reform is pushing the Imperial measurements to 'make trade with the US easier' without realising that a lot of the US Imperial measurements are different.

It's worth remembering, as an aside, that Concorde managed to get designed and built, and flew, with the British using Imperial and the French using metric through the process. That amuses me.
But ... Mars Climate Orbiter failure .

And eg 1 interpreted as pound-force seconds are very different from 1 interpreted as newton seconds. The thruster force number output from Lockheed was actually in United States customary units and the NASA systems using that number assumed it was in SI units ... end of mission/contact never re-established with orbiter.
 
OP
OP
briantrumpet

briantrumpet

Timewaster
But ... Mars Climate Orbiter failure .

And eg 1 interpreted as pound-force seconds are very different from 1 interpreted as newton seconds. The thruster force number output from Lockheed was actually in United States customary units and the NASA systems using that number assumed it was in SI units ... end of mission/contact never re-established with orbiter.

'US Cunits' would be a very useful shorthand even today.
 

Pinno718

Slight downhill specialist
Apparently Reform is pushing the Imperial measurements to 'make trade with the US easier' without realising that a lot of the US Imperial measurements are different.

It's worth remembering, as an aside, that Concorde managed to get designed and built, and flew, with the British using Imperial and the French using metric through the process. That amuses me.

When I was doing the house renovation, I quickly noted the schizophrenia in the building industry.
I also converted to mm quite quickly, finding it much more easier. Plus, when I was studying engineering, we spent an inordinate amount of time working out problems in imperial measurements which had to be converted to metric and then back again. It was a PITA and given I have never torqued anything in ft/lbs, a waste of bloody time.

So, standing at the builders merchants (and it's universal and common). "I would like 10 sheets of 12.5 eight by four plasterboard..."
For the uninitiated, 12.5 in mm, 8 x 4 in feet.
 
OP
OP
briantrumpet

briantrumpet

Timewaster
When I was doing the house renovation, I quickly noted the schizophrenia in the building industry.
I also converted to mm quite quickly, finding it much more easier. Plus, when I was studying engineering, we spent an inordinate amount of time working out problems in imperial measurements which had to be converted to metric and then back again. It was a PITA and given I have never torqued anything in ft/lbs, a waste of bloody time.

So, standing at the builders merchants (and it's universal and common). "I would like 10 sheets of 12.5 eight by four plasterboard..."
For the uninitiated, 12.5 in mm, 8 x 4 in feet.

I remember being told the yarn by a broad Devonian friend of mine who went to the builders merchants for some timber:

"Can I have some 10ft lengths of timber please?"

"Sorry, sir, we only sell it by the metre"

"Oh, in that case I'll have four 3-metre lengths of, er, [quick mental arithmetic] 10cm x 5cm timber then please!"

"Sorry sir, we only sell 4" x 2"".
 

Ian H

Pharaoh
I remember being told the yarn by a broad Devonian friend of mine who went to the builders merchants for some timber:

"Can I have some 10ft lengths of timber please?"

"Sorry, sir, we only sell it by the metre"

"Oh, in that case I'll have four 3-metre lengths of, er, [quick mental arithmetic] 10cm x 5cm timber then please!"

"Sorry sir, we only sell 4" x 2"".

Backward compatibility is important with sectional dimensions, whereas length is more random.
 

Psamathe

Squire
I remember being told the yarn by a broad Devonian friend of mine who went to the builders merchants for some timber:

"Can I have some 10ft lengths of timber please?"

"Sorry, sir, we only sell it by the metre"

"Oh, in that case I'll have four 3-metre lengths of, er, [quick mental arithmetic] 10cm x 5cm timber then please!"

"Sorry sir, we only sell 4" x 2"".
Anybody know why builders/timber merchants standard length for so many things is 2.4m? Longer than 7' but shorter than 8' so not a conversion.
 
  • Like
Reactions: C R

Pblakeney

Shaman
Backward compatibility is important with sectional dimensions, whereas length is more random.

Standard metric pipe dimensions are odd numbers because they have simply converted the imperial sizes and continued manufacturing those.
Tube sizes are metric OD though. You have to be capable of mental gymnastics to work in engineering. 😂
 

Pinno718

Slight downhill specialist
Anybody know why builders/timber merchants standard length for so many things is 2.4m? Longer than 7' but shorter than 8' so not a conversion.

2.4 fits.
Roofing sheets, plywood, plasterboard, sterling board, Poly carb, MDF is all 1200mm, (standard size, you can get half boards), so 2.4 is exactly 2 x the length of the sheets.
I have no idea how many lengths of 2.4 cls I purchased.

My gripe was when a went to see about getting prices for corrugated coroline bitumen sheets to re-roof my 12 x 8 shed (lol) and Jewson's told me that yes they can supply but are 7 foot x 3 feet?!
So I have to buy 1.5x what I actually need and deploy overlaps. ffs. They're not cheap.
 

Pblakeney

Shaman
2.4 fits.
Roofing sheets, plywood, plasterboard, sterling board, Poly carb, MDF is all 1200mm, (standard size, you can get half boards), so 2.4 is exactly 2 x the length of the sheets.
I have no idea how many lengths of 2.4 cls I purchased.

My gripe was when a went to see about getting prices for corrugated coroline bitumen sheets to re-roof my 12 x 8 shed (lol) and Jewson's told me that yes they can supply but are 7 foot x 3 feet?!
So I have to buy 1.5x what I actually need and deploy overlaps. ffs. They're not cheap.

Maybe that's the plan. 😉
 
Top Bottom